How To Connect A Cd Player To A Receiver. Connecting CD Player to External DAC A StepbyStep Guide CitizenSide To connect the music source to the receiver, you need to use a cable jimdandy, use a Y cord (easily found at Wal-Mart, Radio Shack Etc) from an audio out (vintage end) to audio in (computer sound card)
How To Connect A CD Player To An External DAC (With Photos!) from foreveranalog.net
Plug the opposite end of the RCA stereo cables into the "Audio In" port on the receiver. So I connect the three classic AV cables into both devices, and a new Optical cable I bought, the player turns on and I load a disc, and then the receiver doesn't seem to recognize it with no audio being transmitted and in the Denon input setup nothing new appears
How To Connect A CD Player To An External DAC (With Photos!)
Ideally, you will connect it to a jack labeled "CD In." You can connect it to just about any jack as long as you set the machine to the correct input assess what sort of output jack or outputs the CD player has, and hopefully find outputs that match up to B Ideally, you will connect it to a jack labeled "CD In." You can connect it to just about any jack as long as you set the machine to the correct input
How To Connect Cd Player To Amplifier. Select Auxiliary input on the receiver if that is where you connected the EQ. If you're using an analog cable, the red ends will plug into the red holes, and the white ends will plug into the white holes.
How To Connect a CD Player to a Soundbar?. For instance, there will be a "CD" input for your CD player If you're connecting a turntable, it MUST be connected to the input marked.